AI parameter advisory + closed-loop hydraulics raise rate-of-penetration across pilot wells.
The Digital Oilfield, upgraded to 2.0.Unified industrial intelligence, immersive digital twins and AI copilots for real-time upstream operations.
Petroinnovate is the operating system for Digital Oilfield 2.0 — the industry-wide upgrade from siloed SCADA dashboards to a single, AI-native, AR/VR-enabled command surface. We unify WITSML, OPC-UA and SCADA telemetry from every rig, well and facility, render the asset as an immersive digital twin, and put AI copilots in the hands of drillers, well-control teams and production engineers. Deployed across NOC, IOC, drilling-contractor and offshore environments.
- · Siloed SCADA & historian screens
- · Day-late reports, manual reconciliation
- · 2D dashboards, no spatial context
- · Reactive HSE & maintenance
- · Unified industrial data fabric (WITSML · OPC-UA · OSDU)
- · Real-time edge AI & closed-loop advisories
- · Immersive AR/VR digital twins of every asset
- · Predictive HSE & computer-vision safety
An Operating System for the Digital Oilfield.
One real-time command surface across every rig, well and facility — built on a unified industrial data fabric, immersive digital twins and AI copilots deployable from edge to cloud. Engineered for the operational tempo of national, international and contractor-led upstream operations worldwide.
Immersive operational training and cinematic digital field simulation environments.
High-fidelity immersive training environments for drilling crews, well-control teams, offshore operators and maintenance engineers. Operators rehearse critical field procedures in interactive XR using cinematic simulation workflows and spatial operational playback.
Realtime operational telemetry synchronized across drilling, production and offshore infrastructure.
A low-latency industrial digital twin platform synchronizing live WITSML, OPC-UA, MQTT and SCADA telemetry into high-fidelity operational replicas for drilling, production and offshore asset monitoring.
- T+00:42AISTICK-SLIP detected · corrective action recommended
- T+01:18AIECD CREEP within tolerance · monitor 30 s
- T+02:05AITwin re-sync · downhole vibration model updated
- T+03:24AIScenario branch loaded · BHA failure sequence
Model the upgrade against your own operating envelope.
Adjust fleet size, day-rate, baseline NPT, TRIR, uptime and reporting hours. The calculator instantly recomputes 2.0 run-rate values and annualized financial benefit using conservative, published Petroinnovate outcome lifts.
Modeled with conservative published lifts: −34% NPT, +6.6 pts uptime, +2.2% production from optimization, −63% TRIR and reporting reduced to ~15 minutes / asset / day. Final values are validated against your own historian baseline during P-00 of the migration program.
A live operational command surface for upstream energy operations.
Drilling, production, asset health and field telemetry — running simultaneously across a single industrial command surface. Engineered for control rooms, NOCs and onshore operations centers.
- WARN00:48ANN-A PRESSURE DRIFTWELL 7-31H / BASIN-C
- INFO01:02MODEL PROMOTED V2.4.1AI ENGINE
- INFO01:30BOP TEST PASSEDOPS / CREW-04
- CRIT00:04ECD CREEP > 0.4 PPGRIG-04 / FIELD-A
- WARN00:12STICK-SLIP DETECTEDRIG-02 / ZAKUM
- WARN00:21ESP VIB Δ +10%FIELD-K3 / MUMBAI
- INFO00:34AUTO-CHOKE ADVISORYPAD-118 / BASIN-C
- WARN00:48ANN-A PRESSURE DRIFTWELL 7-31H / BASIN-C
- ANN-A1242PSI
- ANN-B830PSI
- WHP3118PSI
- VIB-X4.41G
- VIB-Y4.12G
- TEMP118.5°C
- H2S0PPM
- CH41.34%LEL
Measurable outcomes — and a phased path to get there.
The upgrade from Digital Oilfield 1.0 to 2.0 is delivered as a six-phase program with explicit data integrations, exit criteria and time-to-value for each phase. Every outcome below is benchmarked against the operator's own pre-program baseline.
Computer-vision PPE / red-zone detection + predictive HSE cuts incidents on monitored sites.
Predictive maintenance on rotating + critical static fleet removes unplanned shutdowns.
Auto-generated DDR / morning reports from reconciled telemetry — no overnight manual roll-up.
Stick-slip, pack-off and ECD-creep classifiers detect dysfunction sub-second at the edge.
Continuous emissions tracking on the same fabric as production — regulator-ready exports.
Deploy edge gateways at pilot sites. Stream WITSML, OPC-UA, MQTT and historian data into the unified industrial data fabric with lineage and quality scoring.
- WITSML 1.4 / 2.0
- OPC-UA + OPC Classic
- MQTT Sparkplug B
- Historian replay
- · Edge gateway commissioned
- · Schema registry live
- · Data quality gates active
- · Pilot telemetry visible <2 s
One operator. Seven rigs. Real drilling intelligence.
A live snapshot of an upstream operator's drilling fleet running on Petroinnovate. WITSML-grade telemetry, depth-based traces, torque & drag, ECD and stick-slip — fused with closed-loop AI advisories tuned to the bit, BHA and formation.
- RED · STICK-SLIPRIG-031 · T+00:42Severity 7.2 · advise RPM −12, WOB −4 klbs
- AMBER · ECD CREEPRIG-031 · T+01:04ECD trending +0.18 ppg / hr · cuttings load suspected
- AMBER · SPP RISERIG-014 · T+01:18ΔSPP +180 psi over 8 min · check screens & bit balling
- INFO · ROP OPTIMIZERIG-058 · T+02:02AI Drilling Advisor suggests WOB +3 klbs · projected ROP +14%
- OPT-118 · Bit hydraulics re-tune+12% ROPRIG-031 · 6-1/8" run91%
- OPT-117 · Reduce stand-pipe surge−180 psiRIG-014 · 12-1/4" run87%
- OPT-116 · Slide-rotate sequence−2.1 hrsRIG-027 · build section84%
- OPT-115 · Mud weight micro-stepStable ECDRIG-031 · 8-1/2" run79%
Plugs into the systems your operation already runs.
No rip-and-replace. Petroinnovate ingests live WITSML, OPC-UA, SCADA, MQTT and historian feeds and writes back into ERP, EAM and reporting systems through a certified protocol surface — proven across NOC, IOC and drilling-contractor stacks.
WITSML 1.4 / 2.0
Real-time drilling data exchange — log, trajectory, mud, BHA.
OPC-UA
Industrial control interop across rig SCADA, PLCs and DCS systems.
MQTT Sparkplug B
Lightweight pub/sub for low-bandwidth offshore and remote wellsite links.
Modbus TCP / RTU
Legacy device coverage — flow meters, PLCs, VFDs, ESP controllers.
DNP3 / IEC 61850
Substation and pipeline SCADA telemetry for midstream operations.
PI System / Historian
Bidirectional sync with Industrial Historian, Process Historian, SCADA Suite historians.
Enterprise ERP
Work orders, materials, maintenance and finance integration via OData / IDoc.
REST / GraphQL APIs
API-first surface for custom integrations, BI, data science workloads.
A staged path from legacy SCADA to autonomous operations.
Six phases, predictable exit criteria, and measurable time-to-value at every gate. Explore the full operational maturity model.
Explore roadmap- 0P0Assess2 wk
- 1P1Unify6 wk
- 2P2Automate10 wk
- 3P3Optimize14 wk
- 4P4Scale20 wk
- 5P5Operate 2.0ONGOING
Eight production modules. One operating system.
Each module is independently deployable, integrates with the shared industrial data fabric, and is measured against operational KPIs — not feature lists. Pick the modules you need; activate the rest when ready.
Drilling Intelligence
CAPABILITY · Real-time MWD/LWD analytics with stick-slip, MSE and dysfunction scoring across active rig fleet.
Production Optimization
CAPABILITY · Nodal analysis, choke optimization and allocation reconciliation across producing wells.
Digital Twin Systems
CAPABILITY · Physics-grade twins of rigs, wellbores and surface facilities synchronized with live telemetry.
Predictive Maintenance
CAPABILITY · Failure-mode models on rotating equipment, ESP and top-drive with auto work-order routing.
Rig Analytics
CAPABILITY · Cross-rig KPI normalization, contractor benchmarking and connection-time analytics.
Remote Operations
CAPABILITY · Centralized real-time operations centers with multi-site command, video and intervention.
AI Copilot
CAPABILITY · Domain-tuned reasoning copilot for drilling, production and reservoir engineers with audit trail.
Energy Data Platform
CAPABILITY · OSDU-aligned industrial data fabric unifying SCADA, WITSML, OPC-UA, ERP and historian feeds.
From downhole sensor to enterprise decision — in under two seconds.
A five-layer industrial reference architecture purpose-built for upstream operations. Engineered around open field-data standards, hybrid edge/cloud topology and zone-based industrial security — not a generic SaaS pipeline.
- MWD/LWDDownhole sensors
- Top DriveRig control system
- Mud LoggingSurface gas/lithology
- ESP / GAS LIFTArtificial lift
- Wellhead SCADAPressure / flow / temp
- PLC / RTUProcess control I/O
- Protocol GatewayOPC-UA · Modbus · DNP3
- WITSML Aggregatorv1.4.1 / v2.0 streams
- Edge InferenceAnomaly · stick-slip · ECD
- Store-and-ForwardOffline-tolerant buffer
- Time-Sync (PTP)Sub-ms alignment
- Edge SecurityIEC 62443 zone/conduit
- MQTT / Sparkplug BPub/sub backbone
- Kafka Streams≥ 2.1B pts/day
- REST / gRPCOperator APIs
- OSDU ConnectorSubsurface data exchange
- Historian BridgePI · Aspen · Plant Historian
- Schema RegistryVersioned contracts
- Time-Series LakeCompressed columnar
- Asset GraphISO 15926 / well taxonomy
- Digital Twin StoreWellbore · facility models
- Quality / LineageSource-of-record proofs
- Feature StoreCurated ML signals
- Geospatial IndexBasin · field · pad scope
- Drilling AdvisorROP · WOB · vibration
- Production OptimizerChoke · lift · routing
- Predictive MaintenancePump · compressor · ESP
- Alarm FusionCross-asset correlation
- Mission Control UIMulti-screen NOC/SOC
- Operator APIsEmbed into existing stack
The industrial operating system for global upstream operations.
Deployed by national oil companies, IOCs and offshore drilling contractors to unify drilling intelligence, production optimization, HSE vision and digital-twin operations across every asset. Schedule a technical walkthrough with our upstream engineering team.